Tracked delivery anywhere in Australia. It is free on orders of $100 or more, and a flat $27.50 below that. Allow 5 to 7 days, after a 24 to 48 hour handling time.
Under the Australian Consumer Law you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery. You cover the cost of returning it unless the item is faulty.
If it arrives faulty, damaged or not as described, we put it right at no cost to you under the Australian Consumer Law and the Australian Consumer Law, return postage included.
Thirty-five keys in S2 steel: 13 metric, 13 SAE and 9 Torx, all long arm and ball ended.
Heat-treated S2 alloy steel with a manganese phosphate coating, ball ends for 25 degree entry, and laser-etched sizes in a marked holder.
Thirty-five long arm keys: 13 metric hex, 13 SAE hex and 9 Torx or star keys, which between them cover almost every socket-head fastener.
Each key is heat-treated S2 alloy steel with a manganese phosphate coating for rust and corrosion resistance.
The ball ends allow up to 25 degrees of entry angle, which is what lets a key reach a bolt that is not square to your hand.
The long arm gives reach and leverage, and the sizes are laser etched and the holder slots are marked.
S2 is the point of difference. It is a tool steel with more silicon and manganese than chrome vanadium, and heat treated it takes more torque before it twists, which on a small hex key is the failure that ruins the fastener as well as the tool.
Ball ends buy you angle. Up to 25 degrees off square is the difference between reaching a grub screw inside a pulley and taking the pulley off first.
The trade is worth stating: a ball end contacts on a smaller area than a flat end, so heavy torque goes on the straight end and the ball end is for reach and for spinning a fastener down.
Long arm is a reach and leverage choice. The long side goes into a recess, the short side takes the turn, and the extra length is what gets a key past an obstruction.
Manganese phosphate is a conversion coating rather than a plating. It holds oil, it resists rust and corrosion, and it does not chip off into the fastener the way a plating can.
The holder is what makes 35 keys usable. Laser-etched sizes do not wear off the way stamped and painted ones do, and clearly marked slots are how a set stays complete.
Still deciding?
Not sure yet? That is fine.
You can change your mind. Under the Australian Consumer Law's consumer guarantees you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery.
If it turns up faulty, damaged or not as described, that is on us. The Australian Consumer Law covers you, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.
An Allen Wrench Set, also known as a Long Arm Ball End Hex Key Set or Master Wrench Key Set, is a collection of hexagonal-shaped wrenches used to tighten or loosen screws and bolts with hexagonal sockets.
Why is an Allen Wrench Set important for DIY enthusiasts and professionals?
An Allen Wrench Set is important for both DIY enthusiasts and professionals because it provides a wide range of wrench sizes, making it a versatile tool for various assembly and repair tasks.
What are the common types of hex keys included in a Long Arm Ball End Hex Key Set?
A Long Arm Ball End Hex Key Set usually includes hex keys with a long arm and ball end design. The ball end allows for easier access in tight spaces and angles, improving efficiency during use.
Can an Allen Wrench Set be used for bicycle repairs and maintenance?
Yes, an Allen Wrench Set is commonly used for bicycle repairs and maintenance tasks, as many bicycle components require hex keys for adjustment and assembly.
How can I choose the right Master Wrench Key Set for my needs?
To choose the right Master Wrench Key Set, consider the sizes and types of hex keys needed for the specific projects you'll be working on, as well as the quality and durability of the wrenches.
Are Long Arm Ball End Hex Key Sets suitable for furniture assembly?
Yes, Long Arm Ball End Hex Key Sets are suitable for furniture assembly, as they allow users to access recessed screws and bolts commonly found in furniture designs.
Can an Allen Wrench Set be used for automotive repairs?
An Allen Wrench Set can be used for some automotive repairs, particularly in situations where hexagonal fasteners are present in the vehicle's components.
Do Master Wrench Key Sets come with convenient storage options?
Yes, many Master Wrench Key Sets are designed with convenient storage options, such as folding cases or compact holders, to keep the hex keys organized and easily accessible.
Can Long Arm Ball End Hex Key Sets be used for electronic device repairs?
Yes, Long Arm Ball End Hex Key Sets are suitable for some electronic device repairs that involve small hex screws, such as laptops and smartphones.
Are Allen Wrench Sets made of durable materials?
Yes, Allen Wrench Sets are typically made of durable materials such as chrome vanadium steel or alloy steel to withstand frequent use and resist wear and tear.
How many keys are in the set?
Thirty-five: 13 metric hex, 13 SAE hex and 9 Torx or star keys.
What steel are they made from?
S2 alloy steel, heat treated, which takes more torque than common chrome vanadium or carbon steel.
What is the coating for?
Manganese phosphate, which resists rust and corrosion and holds a light film of oil.
What does the ball end do?
It lets the key enter a fastener at up to 25 degrees off square, which is what reaches a screw you cannot get straight at.
Should I use the ball end for tight fasteners?
No. Use the straight end for real torque and the ball end for reach and for spinning a fastener down. A ball end contacts on a smaller area.
Are the sizes marked?
Yes, laser etched on the keys, and the holder slots are clearly marked as well.
Are they metric or imperial?
Both. Thirteen metric and thirteen SAE hex sizes, plus nine Torx.
What is the long arm for?
Reach past an obstruction and a longer lever for the turn, with the short leg taking the load.
How heavy is the set?
1.25 kg, in a tray 3 cm x 18 cm x 28 cm.
What is the size?
Hex & Torx keys 35 pcs.
What is the item dimensions lxwxh?
3cm x 18 x 28cm.
How much is delivery?
Delivery anywhere in Australia is $27.50, and it is free once your order reaches $100.
Is there an express option?
Yes. Express delivery is offered at the checkout for a flat $27.50 on any order, including orders that already qualify for free delivery.
How long does delivery take?
Five to seven days across Australia.
Do you deliver Australia wide?
Yes, anywhere in Australia, including Tasmania and the Northern Territory.
What payment methods do you take?
Card payment and PayPal, both through a secure checkout. Card details are handled by the payment provider and never reach this site.
What currency are the prices in?
Australian dollars, AUD, and that is what your card is charged.
Do I get a receipt for my order?
Yes. A receipt is emailed once payment is taken, and a second email follows with a tracking number when the order ships.
How do I know my order has been sent?
It is marked complete on our side and you get the confirmation email with the tracking number. Items in one order can travel separately.
Do you have a shop I can visit?
No. We sell online only, with no physical shop or premises, which is how the price stays where it is.
The complete guide
Hex keys, ball ends and rounded socket heads
3 min readIndustry Tools Company Australia
A rounded socket head is one of the more annoying failures in a workshop, and it is almost always a tool choice rather than a torque problem.
Get the size right. Metric and imperial hex sizes run close enough together that an imperial key will go into the next metric socket and feel almost right. That is the single most common way a head gets rounded.
Clean the socket first. Old paint, thread lock and packed dirt keep the key from seating fully, and a key that is only half in is a key that is working on the top corners of the socket.
Seat the key fully before turning. If you can see any of the flats above the surface, it is not in far enough.
Use the straight end for force. Ball ends are for reach: the ball touches on a smaller area, so all the load goes through less metal. Spin a fastener down on the ball, tighten on the straight leg.
Use the long arm as the lever when you need torque, and the short arm as the lever when you need to get in. The set gives you both ends of that choice.
Push, then turn. Pressure into the socket keeps the key seated; turning without it is what lets the key climb out.
If it starts to round, stop and change tactics. A slightly oversized Torx driven into a rounded hex socket will often turn it, and an extractor is the next step after that. Carrying on with the same key only rounds it further.
Ask before you order and we will tell you honestly what the manufacturer states. Free delivery across Australia on orders over $100. What we will not do is tell you a piece of protective equipment suits your hazard: that is your own assessment and the certification marked on the product.
Allen Wrench Set sold by Industry Tools Company Australia at industrytools.net.au.
A 35 piece long arm ball end hex and Torx key set in heat treated S2 alloy steel.
13 metric, 13 SAE and 9 Torx keys, manganese phosphate coated, laser etched sizes.
Price AUD 132, reference price AUD 154.
Pieces: 35 hex and Torx keys.
Breakdown: 13 metric hex, 13 SAE hex, 9 Torx or star.
Material: S2 alloy steel, heat treated.
Coating: Manganese phosphate.
Ends: Ball end, up to 25 degrees of entry angle.
Item weight: 1.25 kg.
Delivery across Australia costs AUD 27.50 and is free on orders of AUD 100 or more, five to seven days. Express delivery is offered at the checkout for a flat AUD 27.50 on any order.
For eligible unused items, this shop offers a voluntary 15-day change-of-mind return window. Consumer guarantees under the Australian Consumer Law apply separately and cannot be excluded.
No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.
