90 degree hook, large full hook, straight pick, small full hook, combination pick, offset pick, hose pick, cotter pick
Drawing force
More than 90 kg, stated by the maker
Shaft
Bent design for working in a small space
Handle
Ergonomic with a soft rubber layer and massage granules
Typical use
Ignition systems, intake valves, seals, fuel valve and hose end O rings, electronics
Weight
Light
Shipping & returns
Tracked delivery anywhere in Australia. It is free on orders of $100 or more, and a flat $27.50 below that. Allow 5 to 7 days, after a 24 to 48 hour handling time.
Under the Australian Consumer Law you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery. You cover the cost of returning it unless the item is faulty.
If it arrives faulty, damaged or not as described, we put it right at no cost to you under the Australian Consumer Law and the Australian Consumer Law, return postage included.
Keep the tips straight and unmarked. A pick with a bent or blunted tip tears the seal it is meant to lift.
Ten Head ShapesHooks, picks and a cotter tool in one set
Over 90 kg Drawing ForceStated by the maker for the set
Bent ShaftsDesigned for working in a small space
Cushioned HandlesSoft rubber layer with grip granules
About this product
Ten head shapes, a bent shaft for tight work, and a rubber handle for the long jobs.
A 90 degree hook, a large full hook, a straight pick, a small full hook, a combination pick, an offset pick, a hose pick and a cotter pick, rated to a drawing force over 90 kg.
Ten pick and hook shapes, which between them cover almost everything an O ring, a seal or a clip needs.
The set includes a 90 degree hook, a large full hook, a straight pick, a small full hook, a combination pick, an offset pick, a hose pick and a cotter pick.
The maker states a drawing force specification of more than 90 kg for the set.
The shafts are bent for confined work and the handles carry a soft rubber layer with grip granules, which is what makes a long session possible.
Picks are one of those sets where the number of shapes is the whole point. A seal that will not come out with a straight pick lifts out with an offset one, and the difference is thirty seconds against half an hour.
The bent shaft is what makes the set usable on a vehicle. Straight picks want a straight run at the work, and almost nothing on an engine gives you one.
The drawing force figure, over 90 kg, is a statement about the shaft rather than about your hand. A pick that flexes at the tip does not lift a stuck O ring, it slips off it.
Handles matter here more than on most tools. Picking a set of O rings out of a valve body is a repetitive job done with fine force, and a hard handle is what turns it into a sore hand.
The maker lists the uses: ignition systems, intake valves, rifle bolt surfaces, seals, fuel valve O rings, hose end O rings and electronic equipment.
One warning worth stating: a pick is a lever with a sharp point, and the surface under a seal is usually a sealing face. Lift the ring, do not lever off the groove.
Still deciding?
Not sure yet? That is fine.
You can change your mind. Under the Australian Consumer Law's consumer guarantees you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery.
If it turns up faulty, damaged or not as described, that is on us. The Australian Consumer Law covers you, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.
A Heavy Duty Pick and Hook Set is a collection of versatile hand tools used in various industries, such as automotive, engineering, and electronics, for tasks like removing O-rings, seals, clips, and other small components.
Why is a Heavy Duty Pick and Hook Set important for professionals?
A Heavy Duty Pick and Hook Set is essential for professionals as it provides precision and control when manipulating small parts, reducing the risk of damage during disassembly and assembly tasks.
What are the common types of picks and hooks included in an Automotive Pick & Hook Tool Set?
An Automotive Pick & Hook Tool Set usually includes straight picks, 90-degree picks, complex picks with multiple angles, and O-ring picks with rounded ends for efficient O-ring removal.
Can a Heavy Duty Pick and Hook Set be used for electronics repair?
Yes, a Heavy Duty Pick and Hook Set is suitable for electronics repair and delicate tasks. The precision tips allow professionals to handle intricate components with care.
How can I choose the right O Ring Picks for my needs?
To choose the right O Ring Picks, consider the types of O-rings or seals you frequently work with, the sizes needed, and the material of the picks to ensure durability and resistance to corrosion.
Are Heavy Duty Pick and Hook Sets commonly used in woodworking?
While Heavy Duty Pick and Hook Sets are not specifically designed for woodworking, some professionals may find them useful for tasks like removing small pins or cleaning tight corners.
Can an Automotive Pick & Hook Tool Set be used for gasket removal?
Yes, an Automotive Pick & Hook Tool Set is often used for gasket removal during automotive repairs, where precision is crucial to avoid damaging sensitive surfaces.
Can I use Heavy Duty Picks and Hooks for craft projects?
Yes, Heavy Duty Picks and Hooks can be used for craft projects that require precision handling of small materials, such as model making or jewelry design.
Is an O Ring Pick set suitable for plumbing applications?
Yes, an O Ring Pick set can be used in plumbing applications to remove O-rings or seals in faucets, valves, and other plumbing fixtures during repair or maintenance.
Can Heavy Duty Pick and Hook Sets handle prying tasks?
While Heavy Duty Pick and Hook Sets are designed for precision work, some picks may have sufficient strength for light prying tasks, though it's recommended to use appropriate tools for heavier prying.
How many picks are in the set?
Ten head shapes, including a 90 degree hook, a large and a small full hook, a straight pick, a combination pick, an offset pick, a hose pick and a cotter pick.
What drawing force is it rated for?
More than 90 kg for the set, as stated by the maker.
Why are the shafts bent?
So they reach into a small space without needing a straight run at the work, which is most of what a vehicle offers.
What are the handles like?
Ergonomic, with a soft rubber layer and grip granules, which is what stops a long picking job becoming a sore hand.
What is it used for?
Ignition systems, intake valves, seals, fuel valve and hose end O rings, and electronic equipment.
Will it damage a seal?
A pick can, if it is used as a lever against the sealing face. Lift the ring itself and keep the tip off the groove.
Is it only for cars?
No. The same shapes are used across home repair, small engines and electronics.
Do the tips stay sharp?
They do with care. A bent or blunted tip tears rather than lifts, so a damaged pick is worth replacing rather than working around.
How much is delivery?
Delivery anywhere in Australia is $27.50, and it is free once your order reaches $100.
Is there an express option?
Yes. Express delivery is offered at the checkout for a flat $27.50 on any order, including orders that already qualify for free delivery.
How long does delivery take?
Five to seven days across Australia.
Do you deliver Australia wide?
Yes, anywhere in Australia, including Tasmania and the Northern Territory.
What payment methods do you take?
Card payment and PayPal, both through a secure checkout. Card details are handled by the payment provider and never reach this site.
What currency are the prices in?
Australian dollars, AUD, and that is what your card is charged.
Do I get a receipt for my order?
Yes. A receipt is emailed once payment is taken, and a second email follows with a tracking number when the order ships.
How do I know my order has been sent?
It is marked complete on our side and you get the confirmation email with the tracking number. Items in one order can travel separately.
Do you have a shop I can visit?
No. We sell online only, with no physical shop or premises, which is how the price stays where it is.
Can I change my mind after it arrives?
Yes. For eligible unused items, this shop offers a voluntary 15-day change-of-mind return window. Email theteam@industrytools.net.au with your order number. Your Australian Consumer Law rights for faulty goods apply separately.
What if the item is faulty or is not what was described?
That is a separate and stronger right under the Australian Consumer Law. You can ask for a repair, a replacement or a refund, and we pay the return postage.
Who pays return postage if I simply change my mind?
You do, unless the item is faulty or we sent the wrong thing.
The complete guide
Getting an O ring out without damaging the groove
2 min readIndustry Tools Company Australia
The seal is cheap. The face it sits against is not, and that is the whole of this job.
Choose the shape before the force. A straight pick works when you can get behind the ring. When you cannot, an offset or a 90 degree hook will get under it from the side, and swapping shape is almost always faster than pushing harder.
Lift the ring, do not lever off the groove. Put the point into the rubber, roll the ring up out of its seat, then pull it clear. The moment the tip is bearing on metal you are scoring a sealing face.
Work cold where you can. Old rubber is brittle and comes out in pieces; warm rubber stretches and comes out whole.
Count the pieces. A fragment left in a groove is what makes a new seal leak, and it is very easy to miss.
Clean the groove before the new ring goes in, and check it with your fingernail. Anything you can feel, the seal will find.
Keep the tips true. A pick that has been used as a screwdriver has a rolled tip, and a rolled tip tears rubber instead of lifting it.
Ask before you order and we will tell you honestly what the manufacturer states. Free delivery across Australia on orders over $100. What we will not do is tell you a piece of protective equipment suits your hazard: that is your own assessment and the certification marked on the product.
Heavy Duty Pick and Hook Set sold by Industry Tools Company Australia at industrytools.net.au.
A ten shape pick and hook set for O rings, seals, clips and cotter pins.
Bent shafts, cushioned handles, drawing force over 90 kg as stated by the maker.
Price AUD 66, reference price AUD 77.
Head shapes: 10.
Included tools: 90 degree hook, large full hook, straight pick, small full hook, combination pick, offset pick, hose pick, cotter pick.
Drawing force: More than 90 kg, stated by the maker.
Shaft: Bent design for working in a small space.
Delivery across Australia costs AUD 27.50 and is free on orders of AUD 100 or more, five to seven days. Express delivery is offered at the checkout for a flat AUD 27.50 on any order.
For eligible unused items, this shop offers a voluntary 15-day change-of-mind return window. Consumer guarantees under the Australian Consumer Law apply separately and cannot be excluded.
No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.
