#0, #1, #2, #3, plus square #1 and #2 and terminal drivers
Torx drivers
T6, T7, T8, T9, T10, T15, T20, T25, T30
Also included
Insulated cable knife 50 mm, 2 metre rule in inch and metric, single pole voltage detector, adjustable wrench 20.32 cm, insulated extension bar, T-handles and L-keys
Case
Rolling tool case
Weight
Heavy
Shipping & returns
Tracked delivery anywhere in Australia. It is free on orders of $100 or more, and a flat $27.50 below that. Allow 5 to 7 days, after a 24 to 48 hour handling time.
Under the Australian Consumer Law you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery. You cover the cost of returning it unless the item is faulty.
If it arrives faulty, damaged or not as described, we put it right at no cost to you under the Australian Consumer Law and the Australian Consumer Law, return postage included.
Inspect the insulation on every tool before every use. Any nick, split, burn or crush in the insulation takes that tool out of service permanently.
Insulated Across The SetInsulated across the set, not just the drivers
80 PiecesDrivers, nut drivers, pliers, cutters and sockets
Metric And InchSockets, nut drivers and T-handles in both
Rolling CaseThe whole set moves in one trip
About this product
Eighty insulated pieces in a rolling case, from 2.5 mm drivers to a 22 mm socket.
insulated screwdrivers, nut drivers, pliers, cutters, sockets, a cable knife, a voltage detector and a 2 metre rule.
An 80 piece insulated set covering screwdrivers, nut drivers, pliers, cutters, sockets, a ruler, a knife and a voltage detector.
The insulated coating is applied to the whole set rather than to the drivers alone.
Sockets, nut drivers and T-handles come in both inch and metric, which is what makes a single case enough on a mixed site.
It arrives in a rolling tool case, which is the only practical way to move a set this size.
Insulated tools are protective equipment, and the set is what makes them usable: a kit where only the screwdrivers are insulated leaves you reaching for an uninsulated plier at exactly the wrong moment.
The set is insulated, and insulation is not permission: the safe working practice is still to isolate, prove dead, and only then work.
The maker's own instruction is worth repeating here because it is the part people skip. De-energise all circuits wherever possible before working on electrical equipment or cables.
Visually inspect the insulation on a tool before you use it. A nick, a split, a burn or a crush in the coating is a path, and an insulated tool with damaged insulation is worse than an uninsulated one because it is trusted.
The breadth is what justifies a set this size: ten slotted sizes, four Phillips, nine Torx, both square drivers, terminal drivers, and sockets and nut drivers in both systems, plus stripping and crimping pliers and a cable knife.
A single pole voltage detector is included. It is an indicator, not a proving unit: a proper prove-dead uses an approved voltage indicator and a proving unit, tested before and after.
Still deciding?
Not sure yet? That is fine.
You can change your mind. Under the Australian Consumer Law's consumer guarantees you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery.
If it turns up faulty, damaged or not as described, that is on us. The Australian Consumer Law covers you, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.
An Electricians Screwdriver Set is a collection of screwdrivers specifically designed for electrical work. These screwdrivers have insulated handles to protect electricians from electric shock while working on live electrical circuits.
Why is an Electricians Screwdriver Set important for electrical professionals?
An Electricians Screwdriver Set is essential for electrical professionals because it ensures their safety when working with electricity. The insulated handles prevent electrical currents from passing through the screwdriver to the user's hand.
What are the common types of screwdrivers included in an Insulated Tool Set?
An Insulated Tool Set typically includes common types of screwdrivers, such as slotted (flathead), Phillips, and square (Robertson) screwdrivers, each with insulated handles.
Can an 80 Piece Electrician Tool Kit be used for residential electrical projects?
Yes, an 80 Piece Electrician Tool Kit is suitable for various electrical projects, including those in residential settings. It provides a comprehensive selection of tools needed for most electrical tasks.
How can I choose the right Electricians Screwdriver Set for my electrical work?
To choose the right Electricians Screwdriver Set, consider the types of electrical systems you'll be working on, the range of screwdriver sizes needed, and the quality and safety features of the insulated handles.
Are Insulated Tool Sets tested for safety compliance?
Insulated tool sets are purpose-built for electrical work. Always inspect tools for wear before use and follow your workplace safety procedures.
Can an 80 Piece Electrician Tool Kit be used for data and communication cabling work?
Yes, an 80 Piece Electrician Tool Kit often includes tools suitable for data and communication cabling work, such as wire strippers, crimping tools, and cable testers.
Can I use Electricians Screwdriver Sets for other non-electrical tasks?
While Electricians Screwdriver Sets are primarily designed for electrical work, their sturdy construction and variety of screwdriver types make them useful for general household tasks as well.
Is an Insulated Tool Set suitable for working on live electrical circuits?
Yes, an Insulated Tool Set is specifically designed for working on live electrical circuits. The insulation on the handles provides an additional layer of protection against electrical shock.
Can Electricians Screwdriver Sets be used with power drills?
Some Electricians Screwdriver Sets come with compatible bits that can be used with power drills, offering additional versatility and efficiency in certain electrical tasks.
Is the whole set insulated?
Yes, the insulated coating is applied across the set rather than to the screwdrivers alone. The manufacturer's own marking on each tool is what states what it is insulated to.
Does that mean I can work on live circuits?
No. The rating is the tool's, not a working method. Isolate the circuit and prove it dead before working on it wherever it is possible to do so.
What should I check before using a tool?
The insulation, visually, every time. A nick, split, burn or crush takes that tool out of service permanently.
Which screwdriver sizes are included?
Slotted from 2.5 mm to 10.0 mm, Phillips #0 to #3, square #1 and #2, terminal drivers, and Torx T6 to T30.
Are sockets included?
Yes, inch from 1/2 to 7/8 inch and metric from 13 to 22 mm, on a 3/8 inch insulated ratchet with an extension bar.
What pliers and cutters come with it?
Long nose in two lengths, bent nose, long flat nose, combination and crimper, stripping pliers, diagonal cutters, high leverage cutters and cable cutters.
Is there a voltage detector?
A single pole detector is included. It is an indicator rather than a proving unit, so a full prove-dead still needs an approved voltage indicator and a proving unit.
Is the case portable?
It is a rolling tool case, which is what makes a set of this size movable in one trip.
Delivery anywhere in Australia is $27.50, and it is free once your order reaches $100.
Is there an express option?
Yes. Express delivery is offered at the checkout for a flat $27.50 on any order, including orders that already qualify for free delivery.
How long does delivery take?
Five to seven days across Australia.
The complete guide
Working safely with insulated hand tools
4 min readIndustry Tools Company Australia
An insulated tool is protective equipment, and like all protective equipment it is the last line rather than the first.
Isolate first. The safe method is to isolate the circuit, lock it off, and prove it dead. Insulated tools exist for the residual risk after all that, not instead of it.
Prove dead properly. An approved voltage indicator, proved on a known source before and after the test. A single pole detector, including the one in this set, tells you something is live; it does not reliably tell you something is dead.
Inspect before every use. Run the tool through your fingers and look at the insulation along its whole length. Nicks, splits, burns, crushing and any exposure of metal all take that tool out of service. Insulation does not get repaired with tape.
Do not modify a tool. Grinding a driver tip, shortening a shaft or drilling a handle destroys the insulation system even where the coating still looks intact.
Keep them apart from the rest. Insulated tools thrown in a bag with a hacksaw get damaged, and the damage is exactly the kind that is hard to see. The case has fitted positions for a reason.
Watch the temperature. Insulation is a polymer: it goes hard and brittle when cold, and it softens with heat. Both change how it behaves under a knock.
Retire on age as well as on damage. A set in daily use collects wear you stop noticing. If you cannot remember when a tool came into service, that is a reason to look at it harder rather than a reason to trust it.
Ask before you order and we will tell you honestly what the manufacturer states. Free delivery across Australia on orders over $100. What we will not do is tell you a piece of protective equipment suits your hazard: that is your own assessment and the certification marked on the product.
Electricians Screwdriver Set sold by Industry Tools Company Australia at industrytools.net.au.
An 80 piece insulated electricians tool set in a rolling case.
Screwdrivers, nut drivers, pliers, cutters, sockets, cable knife, rule and voltage detector.
Price AUD 3740, reference price AUD 3960.
Pieces: 80.
Insulation: insulated across the set.
Sockets: Inch 1/2 to 7/8 inch, metric 13 to 22 mm.
Slotted drivers: 2.5 to 10.0 mm.
Torx drivers: T6 to T30.
Case: Rolling tool case.
Insulated tools are rated equipment and not permission to work live. Isolate, prove dead with an approved voltage indicator and a proving unit, and inspect the insulation on every tool before every use.
Delivery across Australia costs AUD 27.50 and is free on orders of AUD 100 or more, five to seven days. Express delivery is offered at the checkout for a flat AUD 27.50 on any order.
For eligible unused items, this shop offers a voluntary 15-day change-of-mind return window. Consumer guarantees under the Australian Consumer Law apply separately and cannot be excluded.
No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.
