Mesh visor and plastic visor, both adjustable and removable
Typical use
Chainsaw, brush cutter and trimmer work
Weight
1.2 kg
Shipping & returns
Tracked delivery anywhere in Australia. It is free on orders of $100 or more, and a flat $27.50 below that. Allow 5 to 7 days, after a 24 to 48 hour handling time.
Under the Australian Consumer Law you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery. You cover the cost of returning it unless the item is faulty.
If it arrives faulty, damaged or not as described, we put it right at no cost to you under the Australian Consumer Law and the Australian Consumer Law, return postage included.
Check the shell, the harness and the visors for cracks and crazing before every use. Replace the helmet after any impact, even if it looks undamaged, and follow the maker's replacement interval.
Three In OneHelmet, visors and earmuffs on one harness
Removable EarmuffsNoise reduction stated by the maker
52 To 62 cmDial adjustment for a firm fit
1.2 kgLight enough to wear through a session
About this product
One helmet, three jobs: head, face and hearing, adjustable from 52 to 62 cm.
An industrial safety helmet with removable earmuffs removable, supplied with the helmet, a plastic visor and a mesh visor, at 1.2 kg.
An industrial safety helmet that carries a face shield and hearing protection on the same harness, so all three go on and come off together.
Both visors are supplied: a mesh visor for chippings and a plastic visor where a solid screen is wanted.
The earmuffs are removable and are removable, supplied with the helmet.
A dial at the back adjusts the headband from 52 to 62 cm, and the whole assembly weighs 1.2 kg.
The reason a combination helmet exists is compliance in practice rather than on paper. Separate muffs and a separate visor get left in the van; a single assembly goes on with the helmet.
The two visors are for two different hazards. A mesh visor sheds chippings and does not fog, which is why forestry work uses it. A plastic visor gives a solid screen where splash matters more than ventilation.
the earmuff attenuation figure is the maker's figure for the muffs. It is a rating for the protector, not a promise about your workplace: the reduction you get depends on the fit, on the noise level and on how long the muffs stay on.
The dial adjustment from 52 to 62 cm covers most adults, and a helmet that is not adjusted firmly is a helmet that shifts when you look up.
If the marking does not cover your hazard, this is not the right item.
Still deciding?
Not sure yet? That is fine.
You can change your mind. Under the Australian Consumer Law's consumer guarantees you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery.
If it turns up faulty, damaged or not as described, that is on us. The Australian Consumer Law covers you, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.
A Hard Hat Face Shield is a protective equipment used in industrial settings to provide protection to the face and eyes while wearing a hard hat or safety helmet. It is designed to shield the wearer from impact, debris, and harmful substances.
Why is a Hard Hat Face Shield important?
A Hard Hat Face Shield is important because it adds an extra layer of protection to a standard hard hat or safety helmet, ensuring the safety of the wearer's face and eyes in hazardous work environments.
What are the common features of an Industrial Safety Helmet?
Common features of an Industrial Safety Helmet include a durable outer shell made of high-impact-resistant materials, adjustable headbands for a secure fit, and optional accessories like face shields and hearing protection attachments.
Can a Safety Helmet with Hearing Protection protect against loud noises?
Yes, a Safety Helmet with Hearing Protection is designed to protect the wearer's ears from loud noises and potential hearing damage. It usually comes with built-in or detachable earmuffs or earplugs.
How can I choose the right Hard Hat Face Shield for my work environment?
To choose the right Hard Hat Face Shield for your work environment, consider the specific hazards present in your workplace, such as flying debris, chemicals, or intense sunlight. Select a face shield that meets relevant safety standards and provides the necessary protection.
Are Industrial Safety Helmets suitable for construction sites and manufacturing plants?
Yes, Industrial Safety Helmets are highly suitable for construction sites and manufacturing plants where workers are exposed to potential head injuries from falling objects, impacts, or other hazards.
Can a Safety Helmet with Hearing Protection be adjusted for a comfortable fit?
Yes, most Safety Helmets with Hearing Protection come with adjustable headbands and earmuffs, allowing for a comfortable and customized fit for different individuals.
Can I replace the face shield on a Hard Hat Face Shield if it becomes damaged?
Yes, if the face shield on a Hard Hat Face Shield becomes damaged, you can often replace it with a new one. Many face shields are designed to be detachable and replaceable for ease of maintenance.
What comes with the helmet?
A mesh visor, a plastic visor and removable earmuffs, all on the same harness.
What head sizes does it fit?
52 to 62 cm, set with the dial at the back of the headband.
How much noise do the muffs cut?
the earmuff attenuation figure, as stated by the maker. The reduction you actually get depends on the fit and on how long they stay on.
Can I take the earmuffs off?
Yes. The muffs are removable, and so are both visors.
Which visor should I use?
Mesh sheds chippings and does not fog, which suits cutting work. Plastic gives a solid screen where splash matters more.
How heavy is it?
1.2 kg for the whole assembly.
What work is it made for?
The maker names chainsaw, brush cutter and trimmer work, which is where all three protections are wanted at once.
When should I replace it?
After any impact, even if it looks fine, and at the replacement interval the maker prints inside the shell. Check the shell and harness for cracks and crazing before every use.
Does it replace a risk assessment?
No. The hazard decides what protection is needed and to which standard.
What is the product size?
30.5cm x 23cm x 16.5cm.
How much is delivery?
Delivery anywhere in Australia is $27.50, and it is free once your order reaches $100.
Is there an express option?
Yes. Express delivery is offered at the checkout for a flat $27.50 on any order, including orders that already qualify for free delivery.
How long does delivery take?
Five to seven days across Australia.
Do you deliver Australia wide?
Yes, anywhere in Australia, including Tasmania and the Northern Territory.
What payment methods do you take?
Card payment and PayPal, both through a secure checkout. Card details are handled by the payment provider and never reach this site.
What currency are the prices in?
Australian dollars, AUD, and that is what your card is charged.
Do I get a receipt for my order?
Yes. A receipt is emailed once payment is taken, and a second email follows with a tracking number when the order ships.
How do I know my order has been sent?
It is marked complete on our side and you get the confirmation email with the tracking number. Items in one order can travel separately.
Do you have a shop I can visit?
No. We sell online only, with no physical shop or premises, which is how the price stays where it is.
Can I change my mind after it arrives?
Yes. For eligible unused items, this shop offers a voluntary 15-day change-of-mind return window. Email theteam@industrytools.net.au with your order number. Your Australian Consumer Law rights for faulty goods apply separately.
What if the item is faulty or is not what was described?
That is a separate and stronger right under the Australian Consumer Law. You can ask for a repair, a replacement or a refund, and we pay the return postage.
Who pays return postage if I simply change my mind?
You do, unless the item is faulty or we sent the wrong thing.
The complete guide
Choosing head, face and hearing protection that gets worn
3 min readIndustry Tools Company Australia
The best protective equipment is the equipment that is actually on when the noise starts. That is a comfort and convenience question as much as a specification one.
Start with the hazard rather than the product. Falling objects, flying chippings, splash and noise are four different problems, and a combination helmet is worth buying when you have several of them at once.
Read the marking on the product itself. A description in a listing, including this one, is not a substitute for your own assessment.
Fit is what decides whether hearing protection works. A muff rated in a laboratory and worn over a hood, over glasses arms, or on a loose headband delivers a fraction of its rating. Adjust the band until the cups seal all the way round, and check it again after twenty minutes.
Mesh or plastic depends on the job. Mesh does not fog and sheds chippings, and it is what forestry work uses. Plastic gives a solid screen against splash. Neither is eye protection on its own if you are working with chemicals or fine particles.
Replace after an impact. A shell absorbs energy by deforming, and a shell that has done that once has already done its job, whether or not you can see it. Helmets also age: the maker prints a date inside.
Store it out of direct sunlight. UV embrittles a shell over a season, and a brittle shell cracks instead of absorbing.
Ask before you order and we will tell you honestly what the manufacturer states. Free delivery across Australia on orders over $100. What we will not do is tell you a piece of protective equipment suits your hazard: that is your own assessment and the certification marked on the product.
Hard Hat Face Shield sold by Industry Tools Company Australia at industrytools.net.au.
An industrial safety helmet with a face shield and hearing protection on one harness.
Mesh and plastic visors, removable earmuffs removable, supplied with the helmet, 52 to 62 cm.
Price AUD 121, reference price AUD 143.
Product size: 30.5 cm x 23 cm x 16.5 cm.
Product weight: 1.2 kg.
Colour: Orange.
Size: Adult, 52 to 62 cm headband.
Hearing protection: Removable earmuffs, supplied with the helmet.
Protective equipment is selected against the hazard and against the standard marked on the product. This listing states the maker's figures and makes no claim about any particular workplace.
Delivery across Australia costs AUD 27.50 and is free on orders of AUD 100 or more, five to seven days. Express delivery is offered at the checkout for a flat AUD 27.50 on any order.
For eligible unused items, this shop offers a voluntary 15-day change-of-mind return window. Consumer guarantees under the Australian Consumer Law apply separately and cannot be excluded.
No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.
